Axial Fans

Wall mounted axial fans with fibre glass reinforced plastic propeller.

Fan:
• Steel sheet support frame.
• Fibreglass reinforced polyamide-6 impeller.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Models 71, 80, 90 and 100: The protection grid is supplied as an accessory.
• Airflow direction from motor to impeller.

Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings. IP55 protection. Except single-phase models from size 45 to size 63, with IP54 protection. 1 or 2 speeds depending on model.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +60 ºC.

Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.

On request:
• Motor, impeller and grille assembly (F version), except models 71, 80, 90 and 100, which are supplied without a grille.
• Motor, impeller assembly (version G).
• Airflow direction from impeller to motor.
• Special windings for different voltages.

Tubular wall mounted fans. PL version fitted with a plastic impeller and AL version with an aluminium impeller.

Fan:
• Airflow direction from motor to impeller.
• PL version impellers in fibreglass reinforced polyamide-6 and AL version in cast aluminium. Models 40-2T and 45-2T only in AL version.
• Tubular casing in sheet steel with external terminal box.

Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings. IP55 protection. Except single-phase models from size 45 to size 56, with IP54 protection. 1 or 2 speeds depending on model.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.

Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.

On request:
• Airflow direction from impeller to motor.
• 100% reversible impellers.
• Special windings for different voltages.
• ATEX certified Category 2.

Tubular axial fans equipped with 6 or 9 blade aluminium propellers with various angles of inclination.

Fan:
• Airflow direction from motor to impeller.
• Impellers made of cast aluminium with 6 or 9 blades with adjustable angle of inclination.
• Tubular casing in sheet steel.
• Standard version in long casing, equipped with inspection hatch.

Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +120 ºC.

Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.

On request:
• Airflow direction from impeller to motor.
• 100% reversible impellers.
• Special windings for different voltages.
• ATEX certified Category 2.
• 2 speed motors.
• The support feet are supplied as an accessory.

Wall mounted axial fans designed for large air flows at low speed with automatic opening shutter.

Fan:
• Steel sheet support frame.
• Robust X-shaped structure.
• Stainless steel blades.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Specially designed for use in farms and greenhouses.
• Airflow direction from motor to impeller.
• With side access for motor connection.

Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz.
• Working temperature: -25 ºC +50 ºC.

Finish:
• Galvanised steel sheet.

On request:
• Without shutter and with protection grid on the outlet.